Hi Lads
STRIKE TWO !

Here is the result of today's casting .
Looking good so far , enough metal this time



core wash needs spraying on

when i fined my spray gun

cope side not so good , shrinkage due to not enough metal feeding the mould ,,,,,,,, need to add hot metal risers



Mad jack ,,, the things i am melting down are dust/dirt caps that go in the end of hydraulic couplings , they are off 360 excavators ,,, i have a few hundred
Hi Rob T ,,,,,,,, I went for a steel pot

,, i had materials lying around the shop

Until the next instalment Rob