Hi Lads
I finally got to fire up the furnace this after noon , added a couple of risers to the mould ,

the riser was full , this shot show how much the riser fed the mould

Looking good ,no sign of any shrinkage , just started to dig it out the sand

Removed from the sand , with the core intact , as i dont want the core sand to mix with the ,casting sand



The core sand removed and some of the flash


Still have to cut the gates off and a bit of a clean up of the parting lines , quite pleased with the core wash for a home brew mix
A few shots of the gating



Cheers Rob
Edit : Oh how my arms hurt ,, Just to give you an idea of the weight of each moulding box , imagine 4 , 2 ft x 1 1/2 ft flag stones flat in a stack , then having to lift ,turn , and then reposition them all in one go together , that how heavy each flask is ,, and having to do it a few times cos some lump of sand had fallen out of the mould that should not have
