Excelent timing you have

.....
Incidentally I do have rather more of the carbine boxes than I need if anyone needs some.
ooooo....I would love to get a bunch of those kind of boxes, but it would be a killer to send them any distance. I was looking for an old ammo box or something, but looks like I have to roll my own.
I just made this weekend some storage place.
1) Long rods are leaning up against the wall
2) 50 cm to 150 cm rods up in drain tubes bunched together (have to build more this type).
3) 70 cm and shorter vertical on drain tubes bunched together
*Picture update* I made them really simple. Used band saw to cut the 110 mm OD plastic drain pipe and simple frames of board lying around.
....
Stock less than 300mm long - in parts bins on a rolling trolley sorted by material type
....
Any picture? I need to store pretty heavy short pieces of various iron metals and I'm having hard time figuring out how to. I usually just chuck them under storage self and on spring cleaning (not likely to happen even every other year) I make discoveries.
While still on this hot topic: Does anyone has a good coloring system to separate witchestits from free machining stock? Electricians tape? Three paint jars or never drying paint. I'm disapointed on spray paint cans. I have few bars that are proverbial to machine, but welds fine, some that machine well and will not weld....and some that don't do neither well all looks identical twins (minus notes I have taped on some bars, but if I loose the note........)
Pekka