Cheers Lads
![:beer:](https://madmodder.net/Smileys/default/anim_32.gif)
Well that's the jaws finished
![:dremel:](https://madmodder.net/Smileys/default/smiley_dremel.gif)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060231.jpg)
I have only hardened the plain jaws for now ,as I may still add a few mods to the other jaws .
A few really griping shots of the jaws in action , just with crap I have on the bench.
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060225.jpg)
Holding work for threading .
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060223.jpg)
Driving out roll pins .
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060227.jpg)
Odd shaped work
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060217.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060218.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060219.jpg)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060220.jpg)
Thin part
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060221.jpg)
Jaws can be mixed and matched
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060228.jpg)
It takes me 17 seconds ( I time it sad git) to change out all four sets of jaws ,,,,,,, it takes 7 seconds to just wind the vice open enough to get a screwdriver in to the original screws
FREE TO GOOD HOME ![:lol:](https://madmodder.net/Smileys/default/kranke_200-1.gif)
![](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1060233.jpg)
Rob