« previous next »
Pages: [1]   Go Down

Author Topic: Mill Vice  (Read 4274 times)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Mill Vice
« on: January 04, 2012, 05:02:59 PM »
Hi
Being going to do this for ages now



John
Logged

Rob.Wilson

  • Guest
Re: Mill Vice
« Reply #1 on: January 04, 2012, 05:10:19 PM »
Aboot time you got your arse in gear mate  :lol: :lol: :lol: :lol:

Nice screw jacks  :med:

Rob
Logged

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Mill Vice
« Reply #2 on: January 04, 2012, 05:14:08 PM »
The old bloke i got them from would be very happy to see them used
John
Logged

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Mill Vice
« Reply #3 on: January 04, 2012, 05:42:52 PM »
John,

ermmmm ............. do what?
 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Mill Vice
« Reply #4 on: January 04, 2012, 05:50:42 PM »
Dave
You machine a block to be a perfect fit in the table slots
Grip it with the vice
Machine a slot in the vice base then fasten the block in to the machined slot
Vice then will be located square to the table (been shown hear many times)
John
Logged

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Mill Vice
« Reply #5 on: January 04, 2012, 06:28:25 PM »
John,

Sorry John, I was pulling your leg :Doh:

"going to do this for ages now"
The slot in the underside of the vice is already there :) :) :)

 :palm: :palm: :palm: :palm: :palm:

Sorry I just have a strange sense of humour.

Some days, especially today I should have just stayed in bed.
 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)
Pages: [1]   Go Up
« previous next »