| Gallery, Projects and General > How do I?? |
| Mini Lathe Electrikery....... |
| << < (14/19) > >> |
| Stilldrillin:
I've just soldered in, a length of wire. Not a pretty site, but neither am I........ ::) I've now got continuity down all 3 strips, (including the blob, top right). But nowt across. :thumbup: David D |
| John Swift:
Hi Dave , I'd clean as much of the black deposit of between the live and earth tracks as possible sooner or later the current will track across I can't see a connection between the small capacitor and the live track John |
| Stilldrillin:
Point take over black deposit, John. Small capacitor? There is continuity to my wire, from the top right solder blob, as the copper is sound between it and resistor blob. I thought also routing through capacitor would be belt & braces....... David D |
| Stilldrillin:
Still here...... I mostly use brake/ clutch cleaner spray. But, it wouldn't touch the black deposit! Thinners did the job! :thumbup: I've taped the loose mica cover to the pcb, and assembled with new grommets into the plastic box housing, and machine cover. Got continuity from each plug pin (l, n, e) to the appropriate component in the control box.... With no crossover. Just need a parcel to arrive from Amadeal now. Sigh...... ::) David D P.S. When it arrives..... Am I safe to fit motor and board...... And just switch on???? |
| lordedmond:
Just let us know when you switch on :zap: I will call up Ratcliffe and warn them to expect a current surge :) :) :) :) :) Take some pic of the wiring as has been sated and change only one at once Stuart |
| Navigation |
| Message Index |
| Next page |
| Previous page |