| Gallery, Projects and General > How do I?? |
| Mini Lathe Electrikery....... |
| << < (15/19) > >> |
| modeldozer:
Hi If I may chip in, these boards need to be adjusted after instalation. If it is a KB one the manuals are avaleble and explain the procedures. Abraham |
| Stilldrillin:
Thanks Abraham. :thumbup: It is a KB....... Hmmmm...... :scratch: I'd have far more confidence, stripping & rebuilding an engine..... Something like a V12 Jaguar....... ::) David D |
| 75Plus:
--- Quote from: Stilldrillin on May 24, 2011, 08:08:16 AM ---Thanks Abraham. :thumbup: It is a KB....... Hmmmm...... :scratch: I'd have far more confidence, stripping & rebuilding an engine..... Something like a V12 Jaguar....... ::) David D --- End quote --- The KB boards need adjustment ONLY if you are dissatisfied with the factory settings. If adjustment is required the manual has clear instructions, including pictorials, to follow. The main consideration is installing the proper HP resistor for the motor being controlled. Joe |
| Stilldrillin:
Thanks Joe! :thumbup: They are being supplied as a "pair", so should match without fiddlin'...... Mebbe! ::) Still no delivery. :scratch: So, I rang a short while ago, and talked to the Boss, Hugh. Both of his staff are away...... Coping on his own! Parcel's ready! Arranged delivery for Thurs morning...... Possible power dip, in the North East Midlands, Thurs aft...... :zap: David D |
| Stilldrillin:
Well..... Ok...... The parcel arrived a bit late. Managed only to wire and locate motor, and swap boards, before family matters got in the way...... I now have 2 boards, both with orange stickers saying. Plug in horsepower resistor (R21) must be installed for this product to operate. If that's an instruction to me, I've got a problem..... I can only see R20 and R22, and nothing unplugs..... :scratch: Is this an instruction to the person who sets up the board, before it comes to me? :scratch: Confused of Staveley. ::) |
| Navigation |
| Message Index |
| Next page |
| Previous page |