Author Topic: Coax indicator design  (Read 65383 times)

Offline rotorhead

  • Full Member
  • ***
  • Posts: 165
  • Country: england
Re: Coax indicator design
« Reply #75 on: January 14, 2013, 05:33:52 PM »
Hi Bill,

That is very similar to a swash-plate stabilizer, found on many a helis' rotorhead.

Chris
Chris
Sunny Scunny,
North Lincolnshire.

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 939
  • Country: 00
  • Colchester Essex (where the lathes were made)
Re: Coax indicator design 2
« Reply #76 on: January 21, 2013, 04:42:29 PM »
I don't have the time/heat to get on with this ATM.

I've already sent these drawing to a chap who's going to try making it, so if anyone wants to have a go feel free :)

Oh and don't forget to post pictures...

 
Bill

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1946
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Coax indicator design
« Reply #77 on: January 22, 2013, 07:03:20 PM »
Bill,

I picked up 2 x 1" dia DTIs a while back .001 and .0001 IIRC?

So, I've pinched a copy of your plans and will hopefully find some accuracy and  talent, then have a go at it  :)


If I get it going I'll be sure to take and post pic's  :thumbup:





Ralph.
I know what I know and need to know more!!!

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 939
  • Country: 00
  • Colchester Essex (where the lathes were made)
Re: Coax indicator design
« Reply #78 on: January 23, 2013, 07:42:00 AM »
Let me know if there's anything on the drawings that need altering.

Bill
Bill

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1946
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Coax indicator design
« Reply #79 on: January 24, 2013, 11:50:20 AM »
Bill,

Could be a while, But If I do I'll be sre to let you know  :thumbup:






Ralph.
I know what I know and need to know more!!!

Offline BillTodd

  • Hero Member
  • *****
  • Posts: 939
  • Country: 00
  • Colchester Essex (where the lathes were made)
Re: Coax indicator design
« Reply #80 on: June 23, 2020, 04:51:58 AM »
Now showing on YouTube  :)


Bill

Offline Sea.dog

  • Full Member
  • ***
  • Posts: 169
  • Country: gb
Re: Coax indicator design
« Reply #81 on: June 23, 2020, 05:09:54 AM »
Better late than never, Bill  :clap: