« previous next »
Pages: [1]   Go Down

Author Topic: help me identify saw  (Read 6501 times)

Offline colin563

  • Jr. Member
  • **
  • Posts: 88
help me identify saw
« on: May 09, 2010, 07:59:25 AM »
hello

i just got this saw for £10 it works but slow still better than cutting by hand

my question how should i tension the blade when i replace it as no tensioner present













thans colin

Logged

Offline crabsign69

  • Full Member
  • ***
  • Posts: 165
Re: help me identify saw
« Reply #1 on: May 09, 2010, 12:48:50 PM »
hey thats mine could u send it back to me....  :doh:  just kidding  thats a nice saw there
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: help me identify saw
« Reply #2 on: May 09, 2010, 12:59:19 PM »
One of the reasons for such a wide blade is that you don't need a tensioner. Also I'm asuming the blade is a bit thicker than a band saw blade?

Bernd
Logged
Route of the Black Diamonds

Offline colin563

  • Jr. Member
  • **
  • Posts: 88
Re: help me identify saw
« Reply #3 on: May 09, 2010, 01:21:49 PM »
its just a standard 12" hacksaw blade in this at the minute

the frame is aprox 7" end to end


colin
Logged

Offline rdstars

  • Jr. Member
  • **
  • Posts: 19
Re: help me identify saw
« Reply #4 on: May 09, 2010, 01:33:45 PM »
Gee how come I missed out on that, must have been to far away from me....
Logged

Offline johnny123

  • Jr. Member
  • **
  • Posts: 77
Re: help me identify saw
« Reply #5 on: May 09, 2010, 01:45:44 PM »
That is neat! What a great project that would be to build one of those?
Logged

Offline Bluechip

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1514
  • Country: england
  • Derbyshire UK
Re: help me identify saw
« Reply #6 on: May 09, 2010, 03:03:58 PM »
Colin

They were quite commonly advertised in ME ... '60's /'70's ish.

There is another called the ( Kennedy ? ) IIRC.

Dave BC
Logged
I have a few modest talents. Knowing what I'm doing isn't one of them.
Pages: [1]   Go Up
« previous next »