« previous next »
Pages: [1]   Go Down

Author Topic: Arbors again  (Read 8072 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Arbors again
« on: July 23, 2009, 12:35:04 PM »
Can someone please tell me how this cutter is held in the arbor, is it simply threaded in... :scratch:

Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Arbors again
« Reply #1 on: July 23, 2009, 12:44:52 PM »
Darren

That looks like a V belt drive could be from a subsidury drive shaft set up someone has cobbled together  :scratch:

Puzzled

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Arbors again
« Reply #2 on: July 23, 2009, 12:49:42 PM »
No Stew,

It's a BT30 auto change milling arbor that will with a little adaption fit my mill spindle, I was just wondering how the milling cutter was fixed?


Nice idea though.... :thumbup:

ps, I only know that cos Mr Stevenson told me.... :smart:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Arbors again
« Reply #3 on: July 23, 2009, 12:57:39 PM »
Ho the the V groove is for the auto changer I see, not into machining centres that much, from the pic the cutter looks intergrall with the arbor, is there a long screw up the bottom, or through the cutter bit, try unscrewing the cutter left hand  :scratch:

Still puzzled

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Arbors again
« Reply #4 on: July 23, 2009, 01:05:35 PM »
Sorry Stew I'm confusing you again, I don't have one, just wondering as I see some on ebay.

I don't want this type if the cutter can't be replaced......that's the real question.... :scratch:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Arbors again
« Reply #5 on: July 23, 2009, 01:34:11 PM »
Woops

 :doh:

I'd thought you'd got one sorry can't help with that, no idea how they are fixed, I bet someone will know on her though.

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline John Hill

  • The Artful Bodger
  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2023
  • Country: nz
Re: Arbors again
« Reply #6 on: July 23, 2009, 07:44:33 PM »
No idea, never seen such a thing! :med:

However if it is threaded I would expect to see some flats or something so it could be gripped for unthreading... :coffee:
Logged
From the den of The Artful Bodger

Offline shred

  • Jr. Member
  • **
  • Posts: 54
Re: Arbors again
« Reply #7 on: July 24, 2009, 12:18:29 AM »
Shrink-fit?  Some high end tools use that method, though this doesn't really look like one.
Logged

Offline Noitoen

  • Full Member
  • ***
  • Posts: 143
  • Country: pt
Re: Arbors again
« Reply #8 on: July 25, 2009, 04:37:19 PM »
These are one piece production machine tools. I you break one, the whole thing goes to scrap.  ::)
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Arbors again
« Reply #9 on: July 25, 2009, 05:21:57 PM »
Quote from: Noitoen on July 25, 2009, 04:37:19 PM
These are one piece production machine tools. I you break one, the whole thing goes to scrap.  ::)

Thanks for clearing up that mystery, the chaps selling them off could have picked them up from a scrap pile, you'd have to be carful buying one.

Cheers

 :beer:

Stew

Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire
Pages: [1]   Go Up
« previous next »