« previous next »
Pages: [1]   Go Down

Author Topic: End Mill Manufacture  (Read 5653 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
End Mill Manufacture
« on: July 28, 2009, 05:37:50 PM »
I came across this whilst wasting some time this evening.... :ddb:

An interesting insight into how endmills are made......with endmills would you believe.....and a couple of other tools.... :dremel:

Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: End Mill Manufacture
« Reply #1 on: July 28, 2009, 06:51:57 PM »
Darren

Nice find. That sure helps to answer all the how did they make it questions. :D

Thanks!  :beer:

Don
Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: End Mill Manufacture
« Reply #2 on: July 29, 2009, 01:58:39 AM »
That was a very interesting vid, thanks for posting it.


Tim
Logged
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: End Mill Manufacture
« Reply #3 on: July 29, 2009, 02:10:36 AM »
Very interesting Darren

When you see what goes into the manufacture of good quality tools you can start to understand why some are so expensive.

Cheers

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire
Pages: [1]   Go Up
« previous next »