DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (121/202) > >>

riorao:

--- Quote from: Benedikt M. on May 29, 2017, 06:55:45 AM ---Unfortunately I do not speak any Russian. But since you do so, if you translate the English text that I can send you via email to Russian, I will make Russian a language option with the next firmware release and also add it to the configurator as a language option.
I will add a German file too. If someone would also translate the text into French or Italian or any other language, I will surely also include these languages. There is a bit of code to add and a lot of patching to do. But I guess I can make it work for you ;)

--- End quote ---

ok. Give me text file.

aolney:
I finally have my Grizzly G1004 small knee mill moving. My goal was to replace the screwing around with Mach3 and a computer with the DDCSV1.1 and end up with a more reliable and simpler machine. To that end I built a little box that contains the controller and my Geckodrive G320 servo drives with a few switches. It seems to work well and the MPG moves the machine well.
The only glitch is the failure of the G20 mode; no inch display and the G20 has a bug.
I think it will be useable because the Fusion 360 cam can spit out metric G21 code whether the design is in inch or mm.

Andy

PPRINT:
WoW...that turned out nice and clean. Is what I would think a factory install would look like.

Great job.

Rob

riorao:
Hey Benedikt M.
You wanted to send me a file for translation, something did not work out?
On private messages you do not answer.

Benedikt:

--- Quote from: riorao on June 05, 2017, 04:06:45 AM ---Hey Benedikt M.
You wanted to send me a file for translation, something did not work out?
On private messages you do not answer.

--- End quote ---
Hey,
You have not received my email??
That's strange. I have sent you two.
Maybe the email was wrong?

BR,
Benedikt

Navigation

 Message Index

Go to full version