DDCSV1.1 4 Axis controller

The Shop > CNC

<< < (122/202) > >>

aolney:
Rob -

Thanks, I was trying for a clean look.

I thought I would post a few photos and notes from the build.

Control box is mounted on a photo tripod head. It is made from painted alum sheet with 3/4 leg alum angle and epoxy to hold it together.

The wiring is a little tight but do able.

I put the USB cable socket too close the the DDCSV, watch out of clearance on the right angle usb connector.

The Geckodrives are mounted on a 3/16 plate with heat transfer paste and are not getting hot so far.

I had this machine running on Mach3 but was constantly having trouble with wiring ( my fault) noise etc. The thing was just not reliable, and this should be better I am hoping.

Andy

Benedikt:
Thanks to riorao, the online Pandora/DDVSV1.1 Configuration Generator is now also available in Russian :beer:
http://config.pandora-cnc.eu/?lang=rus

It's not completely done yet, but most of the text is already translated.

If anyone would like to translate it to their language, please translate the file below into the desired language and mail it to me (contact-me@bmuessig.eu).

http://config.pandora-cnc.eu/lang/eng.txt

EDIT:
I have now also completely reworked the design of the configurator and made it look a lot more modern. I hope you'll all like it ;)
I have attached screenshots of the new design, but it looks best in person ;)
http://config.pandora-cnc.eu/

EDIT 2:
There is now also support for Chinese:
http://config.pandora-cnc.eu/?lang=chs

Best regards,
Benedikt

chriscnc:
Does the configurator work with the stock software or only the update?

Benedikt:

--- Quote from: chriscnc on June 14, 2017, 04:02:28 PM ---Does the configurator work with the stock software or only the update?

--- End quote ---
It should also work with the stock software, but there should be no reason to not upgrade ;)
If it will work with our software rewrite is not yet sure. It most likely will do so.

maxx2000:

--- Quote from: Benedikt M. on June 13, 2017, 04:43:38 AM ---Thanks to riorao, the online Pandora/DDVSV1.1 Configuration Generator is now also available in Russian :beer:
http://config.pandora-cnc.eu/?lang=rus

--- End quote ---
Translated menu items into Russian are not complete enough and not quite right.
I could correct them some points in accordance with the accepted terminology. Send me the original English and Russian translation.
I think it will be useful to compare 2 translations
Maybe in the future I or someone else will supplement some items of the configurator menu with icons showing the associated function

Navigation

 Message Index

Go to full version