| The Craftmans Shop > New from Old |
| Bargin from the scrapman |
| (1/3) > >> |
| chipenter:
I got a linisher for £10 from the scrapman 3 phase 3\4hp , pulled it apart and rewired the motor to single phase capasitor run had to cut the coils to convert from star to delta , put it back together to test takes a couple of seconds to get up speed , it has one noisy bearing and needs a belt and a switch but thats all and a good clean up . |
| hermetic:
:bugeye: You Suck! What a bargain, I have been after a decent linisher for some time, because the cheap or good rule applies to them! Decent ones seem to be around £200 (used) that is a good british machine. Enjoy it! Phil |
| chipenter:
I wont be using for a while pulled apart again to clean it , if the weight is any mark of quality this weighs in at least 50 kilos . |
| vtsteam:
That's a nice heavy looking one jeff. Good work! :thumbup: :beer: |
| Arbalist:
Looks very well made, far better than modern ones so well worth restoring. |
| Navigation |
| Message Index |
| Next page |