Here's a sample output from my DIVHEADT program (available free on my webpage). If you don't have the indicated hole plates, the data file can be edited to reflect the plates you have available.
If you don't know which plates you need, my DPLATES program (contained in the DIVHEAD archive) can calculate that for you, e.g....
REQUIRED DIVIDING HEAD HOLE PLATES
DH worm gear ratio [40] ? 30
Maximum number of divisions needed [50] ?
Hole plates required for all divisions up to 50
5,6,9,13,14,16,17,19,22,23,29,31,37,41,43,47,49,
Turns & holes/plate for dividing head with worm gear ratio = 30:1
Available hole plates =
16, 17, 19, 20, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49,
2 => 15 & 0
3 => 10 & 0
4 => 7 & 8/16 or 10/20
5 => 6 & 0
6 => 5 & 0
7 => 4 & 10/35 or 14/49
8 => 3 & 12/16 or 15/20
9 => 3 & 9/27 or 11/33 or 13/39 or 15/45
10 => 3 & 0
11 => 2 & 24/33
12 => 2 & 8/16 or 10/20
13 => 2 & 12/39
14 => 2 & 5/35 or 7/49
15 => 2 & 0
16 => 1 & 14/16
17 => 1 & 13/17
18 => 1 & 18/27 or 22/33 or 26/39 or 30/45
19 => 1 & 11/19
20 => 1 & 8/16 or 10/20
21 => 1 & 15/35 or 21/49
22 => 1 & 12/33
23 => 1 & 7/23
24 => 1 & 4/16 or 5/20
25 => 1 & 4/20 or 5/25 or 7/35 or 9/45
26 => 1 & 6/39
27 => 1 & 3/27 or 5/45
28 => a plate with an integer multiple of 14 holes is required
29 => 1 & 1/29
30 => 1 & 0
31 => 0 & 30/31
32 => 0 & 15/16
33 => 0 & 30/33
34 => 0 & 15/17
35 => 0 & 30/35 or 42/49
36 => a plate with an integer multiple of 6 holes is required
37 => 0 & 30/37
38 => 0 & 15/19
39 => 0 & 30/39
40 => 0 & 12/16 or 15/20
41 => 0 & 30/41
42 => 0 & 25/35 or 35/49
43 => 0 & 30/43
44 => a plate with an integer multiple of 22 holes is required
45 => 0 & 18/27 or 22/33 or 26/39 or 30/45
46 => 0 & 15/23
47 => 0 & 30/47
48 => 0 & 10/16
49 => 0 & 30/49
50 => 0 & 12/20 or 15/25 or 21/35 or 27/45