Two More Orphans.......

[Stilldrillin]

Workshop time has been very limited recently...... 

But, the Orphanage never closes. Always extending a warm welcome to needy waifs and strays......   

Like this Scott Flamelicker, which arrived several weeks ago........

Two More Orphans.......


It recently had an outing to a Toy Steam show, where it attracted a lot of attention. 
Now, back in the Orphanage, awaiting it's turn........ 




Also, this "non runner", which is in transit, at the moment........

Two More Orphans.......


Two More Orphans.......


I believe it to be one of the kits which were sold by Arc (?). The only clue I've got is the name "Pembridge".

I don't like the position of the cooling fins........ 

Can anyone point me to an original pic..... Pleese?

David D

[NickG]

Hi David,

Some nice finds there.

I remember it, Axminster used to sell them too, was sure I found them again somewhere the other day but can't remember where! It seems it's called an HAE03 - looks in the pic on link below like the cooling fins might be low by design .. can't imagine why though!

http://www.fieldlines.com/index.php?topic=130453.0

Typical, on the Sieg site it's the only one missing! http://www.siegind.com/gallery/&FrontNews_list01-1329466684059_pageNo=2&FrontNews_list01-1329466684059_pageSize=24.html

Not that this really helps at all but you can buy replacement parts here ... no mention of the engine itself but with a bit more mad googling you might find some info! http://littlemachineshop.com/products/product_category.php?category=1176825611&First=D&Last=R

[NickG]

http://www.amazon.com/Grizzly-Vertical-Stirling-Engine-Machined/dp/B000M66WUO/ref=sr_1_3?s=hi&ie=UTF8&qid=1347366400&sr=1-3&keywords=hae03

It's annoying me now!

[NickG]

Argh!!

It was somebody like RDG or Warco, I thought ha somebody else that's started selling those kits!

[Stilldrillin]

Hi Nick.
Thank you, for your efforts! 

The Young Man who sent it to me also came up with this, from Irish Ebay...   http://cgi.ebay.co.uk/ws/eBayISAP...cvip=true&rt=nc#ht_1101wt_952 
Which has now, just expired!! 

Any road!
It's arrived..... Looks ok. Larger than I thought....... More tired, than distressed. Needs a strip and proper alignment rebuild.
And, a burner.

But, the hot cap can rotate in it's flange! So, I guess I'll be silver soldering again.

Thanks again, for your help and enthusiasm Nick. 

David D

[Ross]

Best start putting in sine extra hours in the workshop David!