Author Topic: Machinerys handbooks anyone collect them?  (Read 9621 times)

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Machinerys handbooks anyone collect them?
« on: August 19, 2011, 05:48:56 AM »
Any of you chaps collect Industrial press machinery's handbooks? Just wondering how much the editions vary as thinking about buying the latest one but might buy the older 25th edition the one I sold.  :(

Bry

Offline jim

  • Sr. Member
  • ****
  • Posts: 441
  • Country: 00
Re: Machinerys handbooks anyone collect them?
« Reply #1 on: August 19, 2011, 06:30:57 AM »
i use an old one at work!
if i'd thought it through, i'd have never tried it

Offline Davo J

  • Sr. Member
  • ****
  • Posts: 475
  • Country: au
Re: Machinerys handbooks anyone collect them?
« Reply #2 on: August 19, 2011, 07:03:43 AM »
I believe the early ones had info about casting etc, that has been dropped out over the years to fit newer technology.

Dave

Offline PTsideshow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2570
  • Country: us
Re: Machinerys handbooks anyone collect them?
« Reply #3 on: August 19, 2011, 08:20:27 AM »
I don't collect them as I have a older version from the 30's that was given to me, and a newer version that wife had when she was doing the CAD. Plus the best parts are are here in Machinery's Handbook Pocket Companion as it is a lot lighter  :thumbup:  They have really no monetary value other than, what the used book seller can get for them. From .50¢ up to a couple bucks for none current editions at the local booksellers. the one will no longer pay anything for them and I have seen people leave them in the free box outside the door.
"The internet just a figment, of my imagination!' 
 
 There are only 3 things I can't do!"
Raise the Dead!
        Walk on water!
                 Fix a broken heart!
and I'm working on the first two!
glen

Offline JackG

  • Newbie
  • *
  • Posts: 1
Re: Machinerys handbooks anyone collect them?
« Reply #4 on: August 19, 2011, 08:36:09 AM »

On occasion, I’ve seen the older ones in antique stores and on eBay for up to $20.

Jack

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Machinerys handbooks anyone collect them?
« Reply #5 on: August 23, 2011, 10:13:04 AM »
Thanks chaps.

Offline shipto

  • Hero Member
  • *****
  • Posts: 811
  • Country: gb
  • Redditch, UK
Re: Machinerys handbooks anyone collect them?
« Reply #6 on: September 15, 2011, 01:43:02 PM »
I got my version 11 from freecycle.
Turns out this life c**p is just one big distraction from death but a good one. For the love of god dont give yourself time to think.
https://myshedblog.wordpress.com/

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Machinerys handbooks anyone collect them?
« Reply #7 on: September 20, 2011, 07:13:27 PM »
Clever idea I'll have to try those recycle sites.  :thumbup:

Offline mklotz

  • Sr. Member
  • ****
  • Posts: 260
  • Country: us
  • LA, CA, USA
    • Software For People Who Build Things
Re: Machinerys handbooks anyone collect them?
« Reply #8 on: September 21, 2011, 11:23:08 AM »
Check your local library for used book sales.  I regularly pick up  copies for less than $5.
Regards, Marv

Home Shop Freeware
https://www.myvirtualnetwork.com/mklotz

Offline AndyB

  • Full Member
  • ***
  • Posts: 192
  • Country: england
  • Cry 'god for Harry, England, and Drummond lathes'
Re: Machinerys handbooks anyone collect them?
« Reply #9 on: September 21, 2011, 04:34:15 PM »
I have got the 24th edition,1992, from Amazon.
Cost me £18 but well worth it.
They have got one on now from the States for £7.74 plus £2.80 postage.

Unless you are after the latest technology the older ones are better because they have real information about engineering, not pages and pages about dilythium crystals and warp factor 11...in my humble opinion :lol:

My favourite book on how-to's has got illustrations of men working in munitions factories but no date so I reckon its early First World War before the men were called up and the women went into the factories. :bugeye:

Andy
Waveney Valley, Suffolk/Norfolk Border

Offline shipto

  • Hero Member
  • *****
  • Posts: 811
  • Country: gb
  • Redditch, UK
Re: Machinerys handbooks anyone collect them?
« Reply #10 on: September 21, 2011, 04:52:31 PM »
to be honest I rarely look in mine most of what I need is in the zeus  :D
Turns out this life c**p is just one big distraction from death but a good one. For the love of god dont give yourself time to think.
https://myshedblog.wordpress.com/

Rob.Wilson

  • Guest
Re: Machinerys handbooks anyone collect them?
« Reply #11 on: September 21, 2011, 04:52:37 PM »

Unless you are after the latest technology the older ones are better because they have real information about engineering, not pages and pages about dilythium crystals and warp factor 11...in my humble opinion :lol:



Andy


 :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :D



Rob  :lol: :lol:

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Machinerys handbooks anyone collect them?
« Reply #12 on: September 22, 2011, 12:27:25 PM »
 :D Yer I know what you mean bought a few engineering books like that one flick through and never used again! 
The Smithells reference book I bought back in my 20s was kinda like that, no one will buy it so I just use it now and again must weigh about 5 or 10pounds  :lol:

An example of info 99% of us will never use or really understand.


Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Machinerys handbooks anyone collect them?
« Reply #13 on: September 22, 2011, 01:01:45 PM »
:D Yer I know what you mean bought a few engineering books like that one flick through and never used again! 
The Smithells reference book I bought back in my 20s was kinda like that, no one will buy it so I just use it now and again must weigh about 5 or 10pounds  :lol:

An example of info 99% of us will never use or really understand.



Bry

I think if you read and study the pages before and after that diagram you may learn how and when to use that information.  :D :D

Cheers  :beer:

Don

Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline AndyB

  • Full Member
  • ***
  • Posts: 192
  • Country: england
  • Cry 'god for Harry, England, and Drummond lathes'
Re: Machinerys handbooks anyone collect them?
« Reply #14 on: September 22, 2011, 03:30:00 PM »
Dilythium crystals are a piece of cake compared to that :lol:
Waveney Valley, Suffolk/Norfolk Border

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Machinerys handbooks anyone collect them?
« Reply #15 on: September 22, 2011, 04:43:26 PM »
It is a Eutectic diagram for Bismuth and something.

The 100% something has a melting ponit of 327 deg C  left hand side.

100% bismuth has a melting point of 271deg C right hand side

With 55.5% bismuth and the rest something else has the lowest melting point 125deg C

Very useful diagrams.

Especially if I tell you the something else is Lead
 :beer:
DaveH



(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Machinerys handbooks anyone collect them?
« Reply #16 on: September 22, 2011, 04:44:40 PM »
Sorry posted twice :hammer:

DaveH

(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Machinerys handbooks anyone collect them?
« Reply #17 on: September 22, 2011, 07:14:19 PM »
Haven't used them graphs since college. :lol:

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Machinerys handbooks anyone collect them?
« Reply #18 on: September 22, 2011, 07:35:30 PM »
Nor me, and thats all I can tell ya' about them :lol: :lol: :lol:
 :beer:
DaveH
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline Sic Semper Tyrannis

  • Jr. Member
  • **
  • Posts: 6
Re: Machinerys handbooks anyone collect them?
« Reply #19 on: September 23, 2011, 02:51:17 PM »
Mine came in a Gerstner machinist toolbox wrapper.

I picked up a vintage Gerstner machinist #11 from craigslist.  Loaded with tools and a Machinerys Handbook.  Had the owners name and "Christmas 1963" written in the front cover...

I love stuff like that!!!

I figured it was about $3500 worth of stuff in that box if I went out and bought it all new  :bugeye: