« previous next »
Pages: [1]   Go Down

Author Topic: My way to make an steaming equipment  (Read 16188 times)

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • lucky amateur
    • Svenssons AckordsWerkstad
My way to make an steaming equipment
« on: January 23, 2011, 03:26:54 PM »
Good evening gentlemen.
I thought that I should show you my progress for making my steaming equipment.  I alredy have shown you my steam engine, but here it is.

http://i1123.photobucket.com/albums/l558/Benni_Svensson/Steam%20engine/MaskinIMindreFormat.jpgMy way to make an steaming equipment
It's a nice little v-2 running pretty well.

Then I started to work on the hand-operated feedpump..

http://i1123.photobucket.com/albums/l558/Benni_Svensson/Steam%20engine/Matarvattenpump.pngMy way to make an steaming equipment

Now I was trying to figger out how to use this in a real steam-world, so I dessided that on the low side, I should choose to take water either from the watertank ore from the condensor (not built yet).
Then on the compression face, I like to choose, if the water should go to the boiler ore to the condensor.
http://i1123.photobucket.com/albums/l558/Benni_Svensson/Steam%20engine/Matarvatenpump_sida.jpgMy way to make an steaming equipment

So it means I have to make som globe valves

http://i1123.photobucket.com/albums/l558/Benni_Svensson/Steam%20engine/Ventil_fram.jpgMy way to make an steaming equipment
The feedwaterpump,globe valves and tees are casting brought from PM Resarch Inc

http://i1123.photobucket.com/albums/l558/Benni_Svensson/Steam%20engine/Ventil_sida.jpgMy way to make an steaming equipment
To complete it will take a long time but I will take one step at the time.
Thanks for reading my broken english . :bang:
« Last Edit: January 26, 2011, 10:53:08 AM by saw »
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Rob.Wilson

  • Guest
Re: My way to make an steaming equipment
« Reply #1 on: January 23, 2011, 04:24:28 PM »
Very nice Benni  :bugeye: :clap: :clap: :clap: :clap: :clap: :thumbup:


Rob
Logged

Offline slowcoach

  • Full Member
  • ***
  • Posts: 230
Re: My way to make an steaming equipment
« Reply #2 on: January 25, 2011, 05:55:01 AM »
Very nice  :bow: :bow: :thumbup:

Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Staveley, Derbyshire. England.
Re: My way to make an steaming equipment
« Reply #3 on: January 25, 2011, 12:53:55 PM »
Benni.
They are beautiful! :bugeye:  :clap: :clap:

Any chance of seeing a video of the engine? Pleese......  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: My way to make an steaming equipment
« Reply #4 on: January 25, 2011, 01:06:30 PM »
Thank you gentlemen, I will try to make a small video, but I have not yet build the boller so it have to bee with air.
What I forgott to explane is that parallel to the hand feedpump, I will try to build a steam feedpump. My idea is like the real world. When they just have started the boiller there was of course no steam so they have to feedthe boiler with a electic pump(my handpump), when they got the steam, they run the boiler with the steam feedpump.  :thumbup:
In my younger day's I was in the Swedish navy, and the last ship was an very old steamer (with a enormus 2 cyl engine).

I am trying to remember that system.  :smart:
« Last Edit: January 26, 2011, 10:54:36 AM by saw »
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: My way to make an steaming equipment
« Reply #5 on: January 25, 2011, 03:56:33 PM »
Ok I am not an Ingmar Bergman but I have done a small movie. Let's see if I can link it here:



Looks like it works  :thumbup:
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Newcastle Upon Tyne
Re: My way to make an steaming equipment
« Reply #6 on: January 25, 2011, 04:27:55 PM »
Really nice
The feed pump is a work of art :clap: :clap: :clap: :clap:
Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Staveley, Derbyshire. England.
Re: My way to make an steaming equipment
« Reply #7 on: January 26, 2011, 01:58:54 AM »
Benni.
Looks good. Runs good. Who could ask for more?  :clap:

Thanks for showing!  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
Re: My way to make an steaming equipment
« Reply #8 on: January 26, 2011, 05:28:35 AM »
Very nice   :mmr:
Logged
Pages: [1]   Go Up
« previous next »