Author Topic: hello  (Read 3597 times)

Offline krymis

  • Jr. Member
  • **
  • Posts: 37
hello
« on: September 18, 2010, 07:44:06 PM »
just found this forum after signing up to HMEM.  I signed up to make my cummins mini mill x2 and cummins mini lathe c2 the best that they can be for what they are. I have both cnced with hoss and stirling retrofits that i made the parts for. 

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • Country: us
  • 1915 C Cab
    • Kingstone Model Works
Re: hello
« Reply #1 on: September 18, 2010, 08:47:19 PM »
Welcome to the collective.  :borg:

Benrd
Route of the Black Diamonds

Offline Brass_Machine

  • Administrator
  • Hero Member
  • *****
  • Posts: 5516
  • Country: us
Re: hello
« Reply #2 on: September 18, 2010, 11:04:09 PM »
HI there  :wave:


Welcome to the collective :borg:


Very familiar with Hoss's design for the X2. got pictures of your conversions? Would love to see them.

Eric
Science is fun.

We're all mad here. I'm mad. You're mad.

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: hello
« Reply #3 on: September 19, 2010, 12:44:21 AM »
krymis

Welcome to MadModder. I believe with your tools you will find it a good fit with the members of this board. Before I was a member of this board I used to spend quite a bit of time on the CNC boards and was always watching the different mods that Hoss was making. He sure did push the limits on his machine and shared with anyone that watched. I will be looking forward to seeing what you have done with yours when you get a chance.  :D :D

Cheers  :beer:

Don

Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline krymis

  • Jr. Member
  • **
  • Posts: 37
Re: hello
« Reply #4 on: September 19, 2010, 08:30:33 AM »
I got a few toys i can show
jd2 bender

english wheel shrinker and planishing hammer 4x6 bandsaw

3 frame jigs

miller sycrowave 180 tig,lincoln promig 135 victor oxy fuel set up with torch, rosebud and brazing tips.
I used to have a haas super mini and tl1 toolroom lathe but now i just do this as a hobby.. 







Offline krymis

  • Jr. Member
  • **
  • Posts: 37
Re: hello
« Reply #5 on: September 19, 2010, 08:32:31 AM »

Offline krymis

  • Jr. Member
  • **
  • Posts: 37
Re: hello
« Reply #6 on: September 19, 2010, 08:33:13 AM »

last one of me trying to break the metal gears spindle bearings or something...and it lasted.