« previous next »
Pages: [1]   Go Down

Author Topic: Taig sized ball turner  (Read 18677 times)

Offline Joe d

  • Sr. Member
  • ****
  • Posts: 251
Taig sized ball turner
« on: March 15, 2010, 10:10:33 AM »
Hi all

Got hit with a little bit of  :proj:, need a ball turner for a number of upcoming things, so got busy and made one

milled out a bit of 6061 for the base, replicating the dovetail on the original Taig cross-slide
http://i235.photobucket.com/albums/ee257/240283/100_2763.jpgTaig sized ball turner

cleaned up a bit of round stock for the rotating bit, milled a dovetail slot for the tool holder; the little bump in the side of the slot is for a piece of teflon to ease the travel of the sliding bit
http://i235.photobucket.com/albums/ee257/240283/100_2765.jpgTaig sized ball turner

Here's all the parts
http://i235.photobucket.com/albums/ee257/240283/100_2766.jpgTaig sized ball turner

And here it is where it belongs
http://i235.photobucket.com/albums/ee257/240283/100_2768.jpgTaig sized ball turner

Cheers Joe
Logged

Offline Pelallito

  • Jr. Member
  • **
  • Posts: 89
Re: Taig sized ball turner
« Reply #1 on: March 15, 2010, 10:18:45 AM »
Joe,
Looks great.
Fred
Logged

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Staveley, Derbyshire. England.
Re: Taig sized ball turner
« Reply #2 on: March 15, 2010, 01:21:10 PM »
Nice work Joe!  :clap:

Thanks for showing......  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Kitchener, Ontario, Canada
Re: Taig sized ball turner
« Reply #3 on: March 15, 2010, 01:53:57 PM »
Joe

Looks great Joe. Thanks for sharing it with us.  :ddb: :ddb:

Cheers  :beer:

Don
Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Taig sized ball turner
« Reply #4 on: March 15, 2010, 03:18:35 PM »
Cool ........   :clap: .......... nice bit of work Joe, ............. and also reminds me I need to make one for my Boxford  http://i16.photobucket.com/albums/b28/CrewCab53/Smileys/whistle.gifTaig sized ball turner

 :thumbup:  CC
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • 1915 C Cab
    • Kingstone Model Works
Re: Taig sized ball turner
« Reply #5 on: March 15, 2010, 03:44:00 PM »
Joe,

I've had in mind to make one for my Sherline. You've given me some ideas as how I might go about it.

Very nice write up too, two items at once, great.  :thumbup:

Bernd
Logged
Route of the Black Diamonds

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Taig sized ball turner
« Reply #6 on: March 15, 2010, 09:11:50 PM »
That's very nice  :thumbup:


I have a peatol/taig under the bench.... Possibly soon under the hammer, but this would be nice to make for it first.... Might clinch the sale?

Have you got the super new ball bearing crossslide screw? Got one fro a show last year, very smooth  :)



Ralph.
Logged
I know what I know and need to know more!!!

Offline Joe d

  • Sr. Member
  • ****
  • Posts: 251
Re: Taig sized ball turner
« Reply #7 on: March 15, 2010, 09:43:20 PM »
Thanks, guys

Ralph:  Still muddling along with the original crossslide screw.  If you really want to up your chances at sale time, make one of these:

http://i235.photobucket.com/albums/ee257/240283/100_2307.jpgTaig sized ball turner

and stuff it in a box like this:
http://i235.photobucket.com/albums/ee257/240283/100_2260.jpgTaig sized ball turner

Cheers, Joe
Logged

Offline Bernd

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3688
  • 1915 C Cab
    • Kingstone Model Works
Re: Taig sized ball turner
« Reply #8 on: March 16, 2010, 09:28:01 AM »
Nice indexing system there Joe.

Bernd
Logged
Route of the Black Diamonds

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Taig sized ball turner
« Reply #9 on: March 16, 2010, 09:53:31 AM »
Quote
Ralph:  Still muddling along with the original crossslide screw.  If you really want to up your chances at sale time, make one of these:

Now that's just showing off  :lol: 

Seriously... What a bit of kit  :clap:  I don't think the talent, time and patience would be available from me at this moment for such an elaborate project..... I can't even finish the little ones I have already started!


I'm sure I'm going to have to search through your posts to see what else you've been hiding  :scratch:   :)





Ralph.
Logged
I know what I know and need to know more!!!
Pages: [1]   Go Up
« previous next »