Author Topic: Marking Graduated Collars  (Read 17139 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
« Last Edit: February 02, 2010, 08:05:44 AM by Darren »
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline rleete

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 534
  • Country: us
Re: Marking Graduated Collars
« Reply #1 on: February 01, 2010, 06:57:30 PM »
Page not found?
Creating scrap, one part at a time

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Marking Graduated Collars
« Reply #2 on: February 01, 2010, 06:59:56 PM »
Works for me  :scratch:

CC

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Marking Graduated Collars
« Reply #3 on: February 01, 2010, 07:08:41 PM »
Works for me, too.
And now I know where I've been going wrong. Don't push the tool; pull it. :doh:

Andy.
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Marking Graduated Collars
« Reply #4 on: February 01, 2010, 11:37:26 PM »
Document Not Found
The document you requested could not be found.


This is what I get when i click the link. Must be a UK thing.  :lol: :lol:

Cheers  :beer:

Don

Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline ksouers

  • Jr. Member
  • **
  • Posts: 42
  • Country: us
Re: Marking Graduated Collars
« Reply #5 on: February 02, 2010, 12:13:43 AM »
Funny.
It worked for me earlier today, but now I get "document not found".


Kevin
Kevin

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Marking Graduated Collars
« Reply #6 on: February 02, 2010, 03:52:51 AM »
Page not found?

Me too....... Sigh.........  ::)

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline CrewCab

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 851
Re: Marking Graduated Collars
« Reply #7 on: February 02, 2010, 04:53:32 AM »
Working OK here this morning. very strange.

It's a pdf document and I did download it, but I don't think the uploads are working on here  :scratch:

CC

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Marking Graduated Collars
« Reply #8 on: February 02, 2010, 05:25:01 AM »
It worked OK for me last night, but it isn't working this this morning  :scratch:

It was nice while it lasted. 

Andy
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Marking Graduated Collars
« Reply #9 on: February 02, 2010, 06:59:04 AM »
Oh dear, that was a nice article as well  :doh:

Lucky I saved a copy then, I suggest you save a copy just in case  :thumbup:

https://docs.google.com/fileview?id=0B_PZgW7Bo_x6ZTc5ZmVjZTUtZTNiNC00NWVjLTkxZjEtN2RmMjIwMzQ3ODIz&hl=en
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Marking Graduated Collars
« Reply #10 on: February 02, 2010, 07:51:35 AM »
Darren

Got it now Darren. This link loaded right up so have got it saved before it tries to hide or play games. Thanks. :ddb: :ddb:

Cheers  :beer:

Don

Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Alan Haisley

  • Jr. Member
  • **
  • Posts: 65
  • Country: us
Re: Marking Graduated Collars
« Reply #11 on: March 27, 2010, 10:20:01 AM »
It's no wonder that used lathes are crap. It's one thing to use a lathe as a micro shaper to draw the rules, quite another to pound on it to emboss numbers.

I've never made a graduated dial, but I'd think that a holding and indexing jig wouldn't be too much to make. Especially since it only needs visual alignment of the numbers.

Alan

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Marking Graduated Collars
« Reply #12 on: March 27, 2010, 11:30:08 AM »
I have to agree with you about hammering on work in the lathe, Alan. I've made the odd dial or two (and one was indeed odd, with 84 divisions) and have knocked up simple MDF jigs to hold the punches.

One dial was small enough to fit in the bench vice on its jig, so I could press the numbers in. If hammering, I find it hard to apply a light thump to 1 and 7, and heavier equal whacks to the other numbers. In the vice I could just turn the handle round to the same place each time to get reasonably consistent depths.

Andy
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline Dean W

  • Hero Member
  • *****
  • Posts: 571
  • My kingdom for a lathe!
    • Projects web pages
Re: Marking Graduated Collars
« Reply #13 on: March 27, 2010, 10:50:43 PM »
Good idea with the vise, Andy.  I have a heck of a time getting nice numerals whacking them with a hammer.
Would never do that to my headstock bearings!

It's a nice article, ('cept for the whacking part), and seems to be up again, using the second link in Darren's original post.  Wasn't there first time I looked some weeks ago.

Dean
Dean W.

Shop Projects:
http://www.deansphotographica.com/machining/projects/projects.html

Praise the Lord and pass the Carbide!