« previous next »
Pages: [1]   Go Down

Author Topic: Finger & Thumb Tap Wrench.  (Read 5204 times)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Finger & Thumb Tap Wrench.
« on: September 19, 2009, 12:53:39 PM »
I thought there had to be an easier way, to make a small tap wrench.  :scratch:

I was right!  :thumbup:

Buy one of these.......




Press the little black button and take off all these bits n pieces.....




After turning the (soft) ratchet section away, polishing the 7mm shank & loctiting a little knurled flange......

Yer left with one of these......




Works a treat!  :clap:



David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Finger & Thumb Tap Wrench.
« Reply #1 on: September 19, 2009, 01:31:58 PM »
Nice one David

At 3 squid fifty its a pinch or should we say a tap.

 :lol:

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Finger & Thumb Tap Wrench.
« Reply #2 on: September 19, 2009, 01:36:19 PM »
David

Very nice little modification and cheap. :ddb:

Cheers  :beer:

Don

Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Gerhard Olivier

  • Sr. Member
  • ****
  • Posts: 314
Re: Finger & Thumb Tap Wrench.
« Reply #3 on: September 19, 2009, 02:37:10 PM »
Nice mod David

I think something like this is going to skip to the top of my round-to-it-list. Taps-I-Breakem.......

Need to go buy some new M6 taps first I  suppose. Will look out for one of them.


Gerhard 
Logged
Guernsey
Channel Islands

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Finger & Thumb Tap Wrench.
« Reply #4 on: September 19, 2009, 05:07:02 PM »
A very nice addition David, bet it'll make tapping much less of a chore now..... :clap:
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Finger & Thumb Tap Wrench.
« Reply #5 on: September 20, 2009, 02:31:34 AM »
Thanks for your comments chaps......  :thumbup:

I used to use a chuck on a stick.



But this small, proper tap wrench, is a great improvement.  :D

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!
Pages: [1]   Go Up
« previous next »