« previous next »
Pages: 1 [2] 3  All   Go Down

Author Topic: Re-Pimping the 7x12 minlathe.  (Read 52253 times)

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #25 on: April 19, 2020, 08:39:29 AM »
In Episode 12, I'm using the LinuxCNC converted MAHO 400E to convert to tapered gibs on the saddle.
https://youtu.be/P4BlYlfRtXM
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #26 on: April 26, 2020, 06:09:55 AM »
Just uploaded episode 13...
https://www.youtube.com/watch?v=NkLtLUbPvzA
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #27 on: May 03, 2020, 06:04:42 AM »
Now that the geometry of the main components has been corrected, we can move on to the motion hardware...
https://www.youtube.com/watch?v=fY3i7bYhIuQ

« Last Edit: May 17, 2020, 06:06:45 AM by RotarySMP »
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #28 on: May 17, 2020, 06:07:41 AM »
Epispde 15 is now up, which covers the spindle motor, and has a bit of Maho slotting head action.
https://youtu.be/yRhdeV1Fau4
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #29 on: June 07, 2020, 06:00:55 AM »
I was too embarrassed by last weeks screw up to post a link to Episode 17...
https://www.youtube.com/watch?v=cLPPT1a20cw

but Episode 18 is back to normal.
https://www.youtube.com/watch?v=1JFKs1kYJxM

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #30 on: June 14, 2020, 07:25:28 AM »
Hi guys. Episode 19 is up...

https://www.youtube.com/watch?v=QzSfhxELxp8

Happy fathers day in Austria,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #31 on: June 21, 2020, 06:20:23 AM »
Hi All,

I just uploaded episode 20.
https://www.youtube.com/watch?v=L6KxpwCrEYY

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #32 on: June 28, 2020, 12:39:17 PM »
Episode 21 is in Youtube,
https://www.youtube.com/watch?v=0NMn3kzvA0o
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #33 on: July 05, 2020, 06:36:04 AM »
Episode 22 is now up.
https://www.youtube.com/watch?v=xTDwz-XExNo

Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #34 on: July 12, 2020, 06:05:47 AM »
Episode 23 is my challenge getting this old Gigabyte brix PC to load linux..
https://www.youtube.com/watch?v=7xNS2MWN8Js

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #35 on: July 19, 2020, 10:36:52 AM »
Episode 24 deal with configuring the Mesa 7i96 ...
https://www.youtube.com/watch?v=YkQ8FZg4ZX0

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #36 on: August 02, 2020, 01:35:31 PM »
Since my camera can do 4K video, I thought it would be good to celebrate the 25th episode in UHD. Bad mistake with a Gen 1 Zbook, and pretty slow DSL line. I took 8 hours to render the video, and another three to upload it. Back to HD 1080P for me.
https://youtu.be/i6wO_pgAIuI
Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #37 on: August 09, 2020, 07:21:12 AM »
Hi Guys, Here is episode 26. First motion is a nice milestone...
https://youtu.be/TNZWCuHoGrA

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #38 on: August 16, 2020, 06:28:49 AM »
Episode 27 is up...
https://www.youtube.com/watch?v=ATdBXBOCII8

Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #39 on: August 30, 2020, 06:35:42 AM »
Episode 28 is not up:
https://www.youtube.com/watch?v=pALfaq9Thgc

Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #40 on: September 06, 2020, 06:49:35 AM »
This week it is again more playing around with the Maho Mill...
https://www.youtube.com/watch?v=G1Im42hJMbY
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #41 on: September 13, 2020, 06:03:58 AM »
E30 is up. The first time I used tool offsets, including a crash due to my lack of uderstanding.
https://youtu.be/XbBYk9M4wnE

Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #42 on: October 04, 2020, 06:22:38 AM »
Episode 31 is up.
https://youtu.be/ui1_xoar09A
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #43 on: October 25, 2020, 07:47:29 AM »
I just noticed I forgot to link Episode 32:
https://www.youtube.com/watch?v=YHeOlkR1Jms&

I also just uploaded E33.
https://youtu.be/yKzH7aQiCS4
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #44 on: November 01, 2020, 06:10:17 AM »
This weeks effort contains more MAHO CNC work...
https://youtu.be/XAQRvcMiHUQ
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #45 on: November 15, 2020, 06:07:01 AM »
Episode 35 again has a little Maho action...
https://www.youtube.com/watch?v=VQJ53_Jdd0s
Ark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #46 on: November 22, 2020, 06:28:38 AM »
Episode 36 is now up...
https://www.youtube.com/watch?v=yh-LJ2a3tJw
Enjoy,
Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #47 on: November 29, 2020, 06:20:09 AM »
The end in coming into sight...
https://www.youtube.com/watch?v=Szsi3yL3Oy4

Mark
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP

Offline hermetic

  • Hero Member
  • *****
  • Posts: 822
Re: Re-Pimping the 7x12 minlathe.
« Reply #48 on: November 29, 2020, 08:53:52 AM »
Hi Mark, love the build, I have in the past been able to do temporary repairs on older ribbon cables using the cores from solid conductor cat 5 cable . Soften the cable with a warm air gun, use a pin to create a hole above the conductor, and push the wire in with tweezers, however, this does not work on the newer super thin ribbon cables, but could you buy a ribbon cable connector, cut the cable right through, install it on the cut ends, and plug it back together?
Phil
UK
Logged
Man who says it cannot be done should not disturb man doing it! https://www.youtube.com/user/philhermetic/videos?

Offline RotarySMP

  • Sr. Member
  • ****
  • Posts: 464
Re: Re-Pimping the 7x12 minlathe.
« Reply #49 on: December 06, 2020, 10:54:21 AM »
 Thanks Phil. It is a really tiny skinny cable. I have contacted Sunfounder about replacing the touch overlay, ribbin cable and all. They responded to ask for my order number, so I am awaiting a further response.

This weeks video is now up....
https://youtu.be/7g7KNUCsrI0
Mark
« Last Edit: December 06, 2020, 05:02:26 PM by RotarySMP »
Logged
Best regards, Meilleures salutations, Mit freundlichen Grüßen, Cu salutari
Mark
https://www.youtube.com/c/RotarySMP
Pages: 1 [2] 3  All   Go Up
« previous next »