Author Topic: Bigger shocks with a bit of "negative camber" (Read 27204 times)

doubleboost · « **on:** October 17, 2015, 04:58:18 PM »

Ford Focus mk1 uprights modified for rally use

Bigger shocks with a bit of "negative camber"

Bigger shocks with a bit of "negative camber"

Bigger shocks with a bit of "negative camber"

Bigger shocks with a bit of "negative camber"

Bigger shocks with a bit of "negative camber"

micktoon · « **Reply #1 on:** October 17, 2015, 05:59:14 PM »

Hi John , looks like that angle plate did the job then

, hope it was easier than you thought

Cheers Mick

awemawson · « **Reply #2 on:** October 17, 2015, 06:02:05 PM »

Classic case of the setting up taking ten times as long as the machining I reckon

doubleboost · « **Reply #3 on:** October 17, 2015, 06:11:12 PM »

The adjustable angle plate made the set up not too bad
I was going to tilt the head on the mill
I was on about 1 hour setting it up
John

krv3000 · « **Reply #4 on:** October 17, 2015, 07:05:48 PM »

good one john

tom osselton · « **Reply #5 on:** October 17, 2015, 08:30:36 PM »

Nice angle plate ( another thing to buy )

MadModder