Poor mans master spiller !

[ksor]

Here is an improvement of a DIY MasterSpiller ... or was it the other way around 

You have Google Translation to the right just under the menu line !

http://kelds.weebly.com/masterspiller.html

[Joules]

   That cutting fluid dispenser caught my attention too.  I have it written on my workshop to do list.  Nice solution ksor.

[dawesy]

Like it. I too have been looking for one. Excellent work.  Defo on my to do list

[stirling lad]

    eh, excuse my ignorance gents,
 But what is it for?I first thought it was some kind of inline oiler,I've never seen this before can you please enlighten me

  ...mike..

[dawesy]

It's a pot to hold cutting oil when using a brush to apply. A lot cleaner due to any excess oil going back Ito the can rather than down the sides and also it won't leak out if it falls off the lathe/ mill

[clivel]

    eh, excuse my ignorance gents,
 But what is it for?I first thought it was some kind of inline oiler,I've never seen this before can you please enlighten me

  ...mike..

https://www.penntoolco.com/catalog/products/products.cfm?categoryID=4098

[awemawson]

Our ink wells were like that at school 55 years ago 

(Filled with 'Quink Blue / Black ' mixed up from powder in a copper jug ! )

[NormanV]

Ha! Andrew, you've reminded me of how we all used to compete to be "Ink Monitor" to fill the inkwells on our desks!

[awemawson]

And just occasionally we'd slip a bit of calcium carbide in the ink well before the Ink Monitor got there so that it made a dreadful stink (of acetylene !) when it was filled.

Lovely things school children.