Damn!!!---And I mean that with all my heart!!! Three weeks ago I called Canadian Bearings and inquired about the sealed needle bearings, their sizes, and the fact that they could be sealed. Got the green light on everything, so went ahead and designed the engine based on that info. Today I sent out a request for quote for all bearings bushings, etcetera on the engine to Canadian Bearings. Just got an answer back----The 1/4" needle bearings I planned on using for the wrist pin (gudgeon pin) are not available anywhere in North America. The 3/8" needle bearings for the big end are available, but they are no longer selling them as "sealed" bearings. This doesn't totally beat me, because I can still go to a 3/8" needle bearing at the wrist pin--(I do have sufficient room). The only pain in the arse is that now the rod bearings will have to be manually oiled. Oh well, none of this is a deal breaker, but it sure annoys me!!! (All the bearings and bushings including taxes came to about $40 Canadian, including taxes.)