The Craftmans Shop > PowerSports
A loader for the Ford 850 from bits and pieces
vtsteam:
And tacked in place. I couldn't get all the tacks done because the tractor was too far from my welder -- cables barely reached. I managed the last tack only with a brand new stick electrode for extra reach! Tomorrow I will replace the tractor ignition, start it and move it back closer to the shed!
Good to see the arms finally in place! :beer:
vtsteam:
With all the rain the hay is really up fast:
RussellT:
--- Quote from: vtsteam on June 11, 2014, 09:57:21 PM ---It's just coincidence that I like the particular features of the odd pieces I received to put together, rather than the other way around. But I may have lucked into the best features of each design.
--- End quote ---
I don't think it's coincidence. You don't like the weak parts of the design. The weak parts have failed. You're left with the better parts of the design. :thumbup:
Russell
vtsteam:
Well I suppose that's true, Russell.
Working on it now, just in for lunch -- got the ignition system rewired with a new solenoid and battery ground strap replaced. The transmission interlock starter switch is now functional. (It had been replaced by a dash mount universal switch, but I restored the stock setup). Found a troubled distributor rotor -- something bad happened to it somewhere along the line -- chipped plastic and the tip bent round! Anyway, fixed.
Started up the tractor, and lifted the tacked-together arms in order to move the tractor back. Arm hydraulics worked fine, and I go it moved back. Working on welding the arms, now....
awemawson:
Glad progress is being made :thumbup:
Don't waggle those arms too much while only tacked !
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version