Gallery, Projects and General > Project Logs |
surface grindy type project |
<< < (12/17) > >> |
shipto:
wiring or the beginnings of it anyway. Knew the wiring harness from my old fridge freezer would come in handy :) |
shipto:
:doh: kept looking at the panel and thinking theres something missing but dismissed the idea as me being daft, Then last night it dawned on me I havent put the speed pot for the X axis on there. Going to have to decide on a resonable position for it but think its probably going to look out of place wherever I put it now. |
nel2lar:
Shipto I drew up a working that I said I would try to get to you. Well here it is and I hope you can understand my scribbling. Nelson Collar |
shipto:
Thanks nel2lar I think I understand what you have drawn and its worth filing for future use. The machine is getting so close now but all the wiring is taking me some time not to mention that i finally got the welding on the camper done just need to put it all back together then gather a few thing and I will be ready to mot it (fingers crossed). |
shipto:
Managed to get a fair bit done this weekend, I have put the rail for the y axis limits which will allow me to set the travel. The wiring for these limit switches and the power for the motor driving the table travels up the arm. However there is a problem with my plc programming the grinder and Y axis is fine but I cant get the X to perform as expected and I am not sure why. Is there anyone who knows about easy logic on the board? |
Navigation |
Message Index |
Next page |
Previous page |