Gallery, Projects and General > Project Logs
small live centre
<< < (2/2)
Meldonmech:
Hi fletch

                    I have one of those, and have found it invaluable for years, at the time they were only available for woodwork, so the point is soft, keep meaning to harden it. Must dig out the " Casenit "

                                                                                   Well Done  David
mfletch:
I made a few different size tip for the centre I used a socket extension bar for the small one its chrome vanadium 
doubleboost:
Very nicely made & show  :drool: :drool: :drool:
Old taper drills are very usefull to keep
John
krv3000:
hi well dun i have made lodes of them me next projekt is a revolving chuck and as john says keep a look out for old morce tapers as they can be put to good yous 
Navigation
Message Index
Previous page

Go to full version