Author Topic: maximit v10-p lathe  (Read 8564 times)

Offline damien

  • Newbie
  • *
  • Posts: 2
maximit v10-p lathe
« on: November 30, 2013, 05:13:24 AM »
Hello my name is Damien.  I have bought a maximit v10-p lathe and I'm having a problem with the gears on it.  It wont stay into 2nd and 4th speed and was just wondering does anyone know anything about this problem.  I have also took apart the 3 jaw chuck and clean it and put it back together and it is sticking when I screw the chuck in so far. Thank you.

Offline Jasonb

  • Sr. Member
  • ****
  • Posts: 451
  • Country: gb
Re: maximit v10-p lathe
« Reply #1 on: November 30, 2013, 01:58:23 PM »
The Emco user group would be a good place to ask

http://groups.yahoo.com/neo/groups/emcoV10lathe/info

Offline damien

  • Newbie
  • *
  • Posts: 2
Re: maximit v10-p lathe
« Reply #2 on: November 30, 2013, 04:29:10 PM »
thank you

Offline BenH

  • Jr. Member
  • **
  • Posts: 35
  • Country: gb
    • My photos
Re: maximit v10-p lathe
« Reply #3 on: December 01, 2013, 01:33:24 PM »
I would 2nd that! The Emco user group is very handy, I have a non P V10 myself :)

I'd take the top cover plate off on the gearbox and make sure the gears and selectors are ok, they do get damaged quite easy with heavy handed use..