| The Shop > Our Shop |
| Any old iron (as long as it's British!) |
| (1/8) > >> |
| Andrew Wildman:
Just thought I would show some pictures of my workshop. I have moved house in the last few months and so after a lot of faffing it is just about usable. Cromwell and Harrison lathes and ajax drill Victoria and AEW mills, herbert high speed drill and a chinese band saw shaper surface plate grinding and welding area assembly area clean and electronics bench and CNC centec mill |
| Andrew Wildman:
Now the workshop is up and running I can carry on with my tool and cutter grinding restoration project the vertical way was very worn so I lapped in parallel to 0.005mm along its length. Pre lapping errors: aligning the base using a precision level: scraping ways flat and parallel machining top of the table base complete scraping bottom of table: measuring x ways |
| Andrew Wildman:
measured results showing over 0.5mm wear! Machining ways |
| awemawson:
I love it! 1 2 3 blocks AND a gardening fork in the same shot. :lol: |
| Andrew Wildman:
That is British sheds for you! The oven was in there for a few weeks, although not working |
| Navigation |
| Message Index |
| Next page |