| The Shop > Our Shop |
| Any old iron (as long as it's British!) |
| << < (2/8) > >> |
| Meldonmech:
Hi Andrew Nice feeling to be functional again after moving house, fine machine shop you have there. Good luck with Grinder Project Cheers David |
| angus:
the ajax drill looks similar to mine.... how many speed ? mines 5 speed, and a bit on the fast side..... wonder if they ever did a variant with a center idler pully |
| micktoon:
Hi Andrew , thanks for posting , looks like you have a really nice shop and some good old machines :thumbup: , not to mention doing some nice restoration work too , looking forward to seeing more . Cheers Mick. |
| vtsteam:
Wow, admirable shop and work! :thumbup: :clap: |
| Andrew Wildman:
The ajax drill is a b 16l, 5 speed, min 380 and max 2700. It is a bit fast for large drilling but I tend to do that in the mill (aew goes down to 25 rpm). The lowest speed on the Herbert drill is about 3000 so I usually use that for v small precision drilling. Easy to smoke even modest sized drills with it but it is very perpendicular with the table and more rigid than the ajax. |
| Navigation |
| Message Index |
| Next page |
| Previous page |