Author Topic: Getting Ready  (Read 1812 times)

Offline puretexan

  • Jr. Member
  • **
  • Posts: 19
Getting Ready
« on: August 02, 2013, 12:23:53 PM »
I asked around and several people told me to go to a recycler close and they
had drops/cut offs they sell cheap. I have a couple plans in mind and needed
some aluminum to build them with. The top piece is 1''x4''x20. It will actually
be what I will use. I picked up some other stuff since I was there. I got all this
20pounds for $30. I thought I did really well. Now to wait for my new 4'' rotary
table to arrive and get started. More later.