Before I spend ages looking for the standards on the D1-5 Camlock specs does anyone have a copy or access to one.
What I need to know is, short of measuring everything up, The layout of the pins and lock screws and depths.
Also a drawing for the pins, good enough so I can make some new pins and backplates. I know the pins can be bought but I want to keep the thread the same as the ones I already have which is M12 x 1
Had enough problems when I had the D1-3 on the CVA with 3/8" BSF, 3/8" UNF, M10 x 1 and M10 x 1.5
I can go to my local library and get a look at the standards and photocopy 2 pages per trip but don't want to spend the best part of 1/2 a day if the standards don't give this information out.