| Gallery, Projects and General > Project Logs |
| Hard Core Three |
| << < (2/3) > >> |
| doubleboost:
--- Quote from: andyf on May 13, 2013, 07:44:08 PM ---Another great watch, John. Only three expletives, which is pretty good considering you wanted a smoke. How did you adjust the cutter in the boring bar between cuts, so it would gradually increase the hole diameter? Andy --- End quote --- Hi Andy I should have shown that :Doh: :Doh: :Doh: :Doh: I use a clock on the cutter and just push the tool through the required amount I need to make a proper adjuster |
| andyf:
--- Quote from: doubleboost on May 14, 2013, 01:42:48 PM ---Hi Andy I should have shown that :Doh: :Doh: :Doh: :Doh: I use a clock on the cutter and just push the tool through the required amount I need to make a proper adjuster --- End quote --- No, John, I should have thought it out for myself :doh: I posted at 00.44 this morning; should have restrained myself until after a night's sleep. Andy |
| paulmo101:
Another great video, thanks John. Did you make the boring bar - if so can you let me have the specs as it looks a good bit of kit? Cheers Paul |
| doubleboost:
Hi Paul It is shown in the previous video John |
| krv3000:
well dun john all bin well i shud be dowing mine this week end |
| Navigation |
| Message Index |
| Next page |
| Previous page |