| Gallery, Projects and General > Project Logs |
| Hard Core Three |
| << < (3/3) |
| lordedmond:
John when you were stuck with the gland face of the cylinder, could you not have pressed a boring head into service, or at last resort do as i have done in the past when faced with the same problem hold a lathe tool in the four jaw offset to the required rad. after all its bot the whole face that is critical but only the bolting face. A point for others its as well to mark the gland bolting face with a couple of discrete pop marks , just so do do not forget which it is :bang: the drill lip gauge sure brought back memories I was introduced to those when I started work as an elect apprentice in 1962 we used the lime wash to coat the up stand ( the guys that did the setting out on the marking out slab used it to coat the work to show up the scribe marks ect. ) great vid as always John I think I have pieced up a tip with all of your previous ones Stuart ps looking forwards to more |
| micktoon:
Another quality video John :thumbup: :clap: :clap: , keep them coming , everyone is waiting for the next episode! Cheers Mick |
| slowcoach:
:thumbup: :clap: :clap: |
| jim4472:
Brilliant Videos John .. keep em coming .. how about a video on grinding up centre drills etc for boring bars angles etc. Jim |
| paulmo101:
Hi I would like to second Jims request for a video on grinding broken drills etc for the boring bar or fly cutting. The videos are great john thnks for the time and effort in making them.. Cheers Paul |
| Navigation |
| Message Index |
| Previous page |