Author Topic: Tap and Drill Stand  (Read 4105 times)

Offline Meldonmech

  • Hero Member
  • *****
  • Posts: 933
Tap and Drill Stand
« on: May 10, 2013, 09:40:33 AM »
Hi Guys,
             This a beginners weekend project, and requires a small lathe and a drilling machine. It is the first project I made in my own workshop, which consisted of a bench, vice, home made lathe, and a light drilling machine. I normally spent ages looking for taps and tapping drills in my overfull toolbox. I saw this stand idea in a magazine, possibly M.E., and since have made similar stands for all my taps/drills. I have found them extremely useful and time saving.

Offline modeldozer

  • Sr. Member
  • ****
  • Posts: 299
  • Country: es
  • Valencia, Spain
    • AJ´s Truckmodeling
Re: Tap and Drill Stand
« Reply #1 on: May 10, 2013, 09:52:01 AM »
Hi,

Very nice.  :thumbup: :clap:
The to do list just got longer again.

Cheers  :beer:
Abraham

Offline micktoon

  • Hero Member
  • *****
  • Posts: 797
  • Country: gb
Re: Tap and Drill Stand
« Reply #2 on: May 10, 2013, 04:56:08 PM »
Nice Job David  :thumbup: , a handy little project and very useful too ......another thing or three on the to do list  :palm:



Cheers Mick.

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2185
  • Country: gb
Re: Tap and Drill Stand
« Reply #3 on: May 11, 2013, 05:20:47 PM »
nice job  :thumbup: