Author Topic: Looking for ideas to fit a quill dro on a warco vmc  (Read 11451 times)

Offline paulmo101

  • Jr. Member
  • **
  • Posts: 41
Looking for ideas to fit a quill dro on a warco vmc
« on: March 29, 2013, 05:09:42 PM »
Hi Folks

I`m a noobie so be gentle with me - I`m looking for some ideas on how to fit a quill DRO on my Warco VMC 6x26 mill.  I`m looking at one of the cheapo vertical readouts but need some ideas on how to attach to my quill and how to attach ot5her part to machine/non moving part?
Any photos of similar installations would be great and words of advice welcome.

Thanks
Paul

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #1 on: March 29, 2013, 06:10:44 PM »
Cheap vernier works fore me

John

Offline paulmo101

  • Jr. Member
  • **
  • Posts: 41
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #2 on: March 30, 2013, 06:05:05 AM »
Hi John

That looks a good idea - I know Aldi, Lidl etc sometimes have verniers for about £8.00 I will look out for one.

Cheers

Paul

Offline Arbalist

  • Hero Member
  • *****
  • Posts: 673
  • Country: gb
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #3 on: March 30, 2013, 06:47:47 AM »
This is mine, cost £14 at Warco on an open day.



I must get rid of that silly handwheel on the front, I never use it anyway.

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #4 on: March 30, 2013, 10:51:25 AM »
Hi,

I've fitted 2 to 2 different machines...

Old machine - Sorry about the massive pic's. the were a while ago before the re-sizer. Can't alter them now as they are in other threads and may be destroyed in them!










There is a bit between the collar and the DRO so they are tied together... I just don't have a pic or the machine anymore.






My newer mill' has a simpler affair on it, jjust made an extension plate and fixed the bottom to the bit that already stuck out of the quill  :)

No photo's oddly  :scratch:  But you can see it in this vid... Click on the pic'





Incidentally... Arbalist,

You never use your fine quill feed? :jaw:

 I use mine all the time... And modified it as in the vid' above to make a great automated fine boring rig.



Hope something in there helps? I've got hundreds more pic's if you wanted to see any?




Ralph.
I know what I know and need to know more!!!

Offline paulmo101

  • Jr. Member
  • **
  • Posts: 41
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #5 on: March 30, 2013, 03:01:33 PM »
Hi Folks

Thanks for the replies - plenty of ideas now.

I use the fine feed most of the time.

Cheers

Paul

Offline Arbalist

  • Hero Member
  • *****
  • Posts: 673
  • Country: gb
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #6 on: March 31, 2013, 06:54:09 AM »
The DRO was the first mod on my VMC, closely followed by the drilling handle.
I have'nt done any boring on my mill so never used the fine feed. For drilling I use the large handles and for milling I raise the Knee. For ridgiditys sake I'd probably use the knee for boring as well but guess it's a personal thing I need to try both ways.

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #7 on: March 31, 2013, 07:09:15 AM »
Ahh, well... There's the difference.... I ain't got a knee mill!  :lol:

Is your knee powered?  That's where I got the idea for my mod' I watched Bogs bore an amazingly smooth shiny cylinder with stunning ease using the powered knee on his mill   :borg:


Problem solved  :thumbup:




Ralph.
I know what I know and need to know more!!!

Offline Jonny

  • Hero Member
  • *****
  • Posts: 780
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #8 on: March 31, 2013, 04:50:22 PM »
The proper and accurate way is as Divided has done. All the others will have play in the depth stop and also nut theyre attached to.

Done all 3 of mine off the quill as Divided has done before going over to full on dro 6yrs ago. You can see the alum bracket screwed to casting. Although not a 626, same principle. http://pic20.picturetrail.com/VOL15/728921/1252422/392394060.jpg

Offline paulmo101

  • Jr. Member
  • **
  • Posts: 41
Re: Looking for ideas to fit a quill dro on a warco vmc
« Reply #9 on: April 01, 2013, 11:41:46 AM »
Hi Folks

Thanks for all the input.

Jonny I see what you mean about mounting direct to Quill I will keep any eye open for a piece of material of suitable size to make a collar - saying that I`m sure a while ago I saw a mounting where the person had used some kind of large jubille clip to mount onto the collar on the quill but I cant seem to find anything on that at the moment.

Thanks again

Paul