(that is another measurement i dont understand)
You may be unfamiliar with it, but you
can understand it! (because it is so simple)
![:)](https://madmodder.net/Smileys/default/side2side.gif)
1 degree = 60 minutes, .0.5° = 30 minutes, 0.25° = 15 minutes
1 minute = 60 seconds etc etc.
It's primary use is for quick, in-the-head*, maths for navigation. Powers of 60 factor (i.e. can be divided exactly) by 2,3,4,5,6 etc. making division by those factors easy and accurate.
eg. 25° 34' 18" divided by three = 8° 31' 29"
The same units are used on charts and navigating instruments so there's no need to convert.
In general, converting units should be avoided (or left to a computer ;)) as can easily lead to rounding or typographical errors, so if the standard says "inches per foot" stick with it
Bill
*fractions (e.g. of an inch) have some of the same 'magic' which is why they been around so long - It's only the wide spread use of calculating machines that makes metric/decimal systems attractive.