MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Check out the latest in the Gallery:
Gallery
Home
Help
Search
Login
Register
MadModder
»
The Shop
»
Tools
»
TToggle Clamps for small items
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: TToggle Clamps for small items (Read 3945 times)
Meldonmech
Hero Member
Posts: 933
TToggle Clamps for small items
«
on:
September 14, 2012, 10:50:59 AM »
HI Guys
These little toggle clamps I use for fine and delicate work holding when using the small sensitive drilling machine 1/4 max. capacity. Each clamp has a different foot and these cover the majority of work I do on small irregular shaped components. The hand held assembly sits on the machine table. A hard wood block used to support the work is tacked in position, this helps to reduce burrs when the drill breaks through. The feet can have card, leather or plastic soles glued on to protect the work.
Cheers David
Logged
micktoon
Hero Member
Posts: 797
Country:
Re: TToggle Clamps for small items
«
Reply #1 on:
September 15, 2012, 04:28:56 PM »
Hi David, They look like handy little gadgets
, thanks for posting. I can think of a good few times where I would have used one , so its another thing on the to do list
...... I just hope I am going to live to 100 years old or not everything on this list is going to get done
Cheers Mick
Logged
Meldonmech
Hero Member
Posts: 933
Re: TToggle Clamps for small items
«
Reply #2 on:
September 16, 2012, 06:10:53 PM »
Hi Mick
Thanks for your comments, I always make workshop, tools and machinery mods between projects, all three clamps
only took a couple of hours to make, but have saved me many hours.
Cheers David
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
The Shop
»
Tools
»
TToggle Clamps for small items