Stew,
Here is the website for the real KMG-
http://www.beaumontmetalworks.com/index.html CS,
I never knew that the initials stood for that.

Thanks for enlightening me.
Eric and Ralph,
it is a nice little press. The only parts I did not make, were the 4 allen screws holding the cover.
Bernd,
Unfortunately, I only have his first two books. I need to get the rest.
Spin,
I started on a G. Thomas 4" manual rotary table and got side tracked. I made the top, and got mad at myself and put it aside for a while. I took a small cut with my milling adapter in the lathe and it shifted. I truly dislike that thing!

I took a little too much material because of that. I will weld it up and clean it up. That blasted thing turned a brand new dovetail cutter into junk in the blink of my eye when I tried to cut the dovetail for the travelling steady.

I ended up taking it to work and made it on our vertical mill.
Thanks for the kind words.
Regards,
Fred
PS Ralph, I had another small video that I took at the same time. I deleted it because I did not know I was filming at the time. I could see a great view of my shop safety sandals and calves along with the floor and walls.
