Home Base > Introductions

Hello world !

(1/3) > >>

ParCan:
Hi

I'm Alex from Chelmsford in Essex.
I got bitten by the 3D Printer Bug 2 years ago and have made some fun things with it.

Then I started selling Parts Sets, and designing extruder nozzles.
Then I bought a mini Lathe
Then I started selling my 3D Printer Nozzles
Then I bought a Myford.
Then I had to sell more nozzles to buy tooling.........
........

I was just hunting around the net a week ago and found the Puddleduck engine.
http://www.machinistblog.com/bogstandards-paddleduck-engine-plans/
It seemed like a fun thing to make - so I now have the Base plate, Block Plate and 2 Cylinder caps.

I firmly believe in going in at the deep end, and i'll let you know how I get on.

Alex
AKA ParCan

spuddevans:
Hi there Alex  :wave: welcome to Madmodder :mmr:


--- Quote from: ParCan on April 27, 2012, 01:44:03 PM ---I was just hunting around the net a week ago and found the Puddleduck engine.

--- End quote ---

A fine choice for a project, I built one as my 2nd engine build, it really taught me a lot of great techniques. I documented my build here :- http://madmodder.net/index.php?topic=1525.0


--- Quote ---I firmly believe in going in at the deep end, and i'll let you know how I get on.

--- End quote ---

Please do keep us all clued in to what you're doing, start a thread about it in the project logs section and keep us updated with your progress, especially with plenty of pics :worthless: :D :D


Glad to have you here.


Tim

ParCan:
Hi Tim.

I'm not the greatest of writers, but i'll do my best.....
You may find some interesting stuff @
http://parcansreprap.blogspot.co.uk/

raynerd:
Hi ParCan... I`ve just been looking at your blog, good stuff! 

You have a pm!

Chris

Brass_Machine:
Hiya ParCan!

Welcome to the collective :borg:

I am very interested in doing a 3D printer. I know there is I need to learn...

Eric

Navigation

[0] Message Index

[#] Next page