The Breakroom > The Water Cooler

Now what do I do with all these??

(1/2) > >>

Divided he ad:
Ok, so you may have seen the thread on old lamps, well in the box that they came with there were all of these.....

Some of which I have no idea about a use for. So,my question to the collective.....  What would/could you do with these?   :borg:


First the nice big relay thingy.... AKA table lamp!


Then a big 25V relay/solenoid thingy


A big stop start switch thingy


An old board with loads of relays, some large capacitors and resistors


A big "pull for off" emergency switch


Another big old relay


some very fine copper (I think) gauze


some catch thingys that do still work


some kiln bricks (soldering hearth me thinks?)




And for darren, the picture off the side of the big transformers, they have GU14 on the bottom edge too... I don't know if these work?





Well that's it!  They are all in dry storage at the mo'

I wil probably strip most of it for the little bits?  But if anyone has any better ideas.....  :scratch:



Ralph.

John-Som:
Hi Ralph

Not sure about those electrical thingies. Saw something along those lines last time I watched a Frankenstein movie. Those kiln bricks look interesting though (well fairly interesting !). I made a little hearth for my silver soldering exploits a while back and discovered there are two types of bricks. Those that absorb heat (you don't want those) and those that reflect heat (you do want those).  Have you figured out which yours are ?

John S

sbwhart:
The Glass things strip the middle out, turn them over, fill with water and keep goldfish.  :ddb: :ddb: :ddb:

The rest put on ebay ther's bound to be someone who knows what they are and will wont them. :  :lol: :lol:

Cheers :wave:

Stew

bogstandard:
Those latches look very useful for the shop, fold up tables come to mind.

I will take a little square of mesh off your hands if you can spare it. The mini bunsens I will be making in the future require very fine metal mesh as a tip diffuser.


Bogs

Darren:
Two black transformers are interesting, what pysical size are they Ralph?

They are of course valve power supply transformers and will not be much use for much else.

Why?

Firstly they are designed for 115V mains, so in the UK the primaries of both transformers need to be wired in series.
Output is 700V, further adjusted up or down with the 170, 10, 10, windings as required.
But this will only offer a very low current that suits valve HT requirements.

The three 6V taps are quite powerful as needed for many valve heaters.

Now then, that change over switch solenoid. Perfect for someone with a second mains power source. Flick second power source on and the relay would disconnect from the grid mains supply and connect to the secondary supply.

Nice bit of kit

Darren

Navigation

[0] Message Index

[#] Next page