The Shop > Our Shop

Visit my shop

<< < (3/3)

AussieJimG:
Nice shop Chris and I particularly like the steel storage racks.

Jim

Stilldrillin:
Hi Chris.

Big (slightly belated), welcome to the Collective!  :borg:

You look very well set up there. I envy you your Cleaner......  :thumbup:

My Cleaning Person insists. Dusters, only. In house, only......  :(

Enjoy!

David D

rotorhead:
Hi All,

Thanks again for the warm welcome, I tend to view the forum at odd hours, as only get home in the week for breaks, minimum 15mins max 45mins.

rotorhead:
Hi Folks,

I've finally gotten around to 3 phasing my miller, so it looks a bit tidier photo 1

In photo 2, I'm making a guiding wedge for a diamond lapping plate, to tidy up one of my Masters' cross slide dovetails.

Photo 3 shows the intention, seems to have worked, the dovetail was 0.001" wider at the handwheel end, so gave it a little rubbing.

rotorhead:
Hi Lads,

I've read elsewhere on the forum, about people having difficulty viewing pictures above 800x600.

If anyone is in this position and would like me to resize, please let me know to do the ones on this thread.

I'll post all subsequent pics at 800x600, sorry if I've pissed on anyone's chips...

Navigation

[0] Message Index

[*] Previous page