Gallery, Projects and General > Gallery

Something I recently worked on....

<< < (2/3) > >>

DavidBraley:
Joe,

This plate set is for a McPhearson Strut type front suspension. So the spherical bearing at the top receives the top of the strut. The block in the middle slides tilting the strut up to 3 degrees. The top can rotate, but can also have the perimeter bolts removed to be rotated even more. This plate set can tip the top of the strut up to 3 degrees from center (original OEM location) in any direction in a full 360 degrees of freedom.

I hope that made sense.

HS93:
So it's like the old roller top mounts on top of the group 4 Bilstine's I had on my old Mk2 Escort  they could be ajusted but not as easy as yours. but it was 30 od years ago.

peter

Stilldrillin:
Thanks David!  :thumbup:

For the top of a McPhearson Strut, makes it much clearer for me. Though, as Peter says...... It was all some 30 years ago!   

David D

75Plus:
 :Doh:  :Doh: I was thinking in the vertical instead of the horizontal plane. Once I got my thinking "leveled" it became much clearer.

Joe

Brass_Machine:
Curious as to the material used?

Eric

 :ddb:

Navigation

[0] Message Index

[#] Next page

[*] Previous page