Gallery, Projects and General > Gallery

Something I recently worked on....

<< < (3/3)

doubleboost:
Hi
David
Very nice looking bits of kit
Sadly i am also from the MK2 escort era
A post on anodising would be very welcome
John

DavidBraley:
Eric,

The plates are machined from 6061-T6 and the hardware is stainless. The washers under the stainless bolts you see on top I machine from 303 Stainless bar stock.

John,

I have a project coming up in a few months that will need some Anodizing. It's for a personal project I'm working on. I'll take some pictures then and post up a thread of my steps.

I even have an interest in doing some Zinc plating here for hardware. If I ever get that going I'll share that too.

Take care,

David

Navigation

[0] Message Index

[*] Previous page