« previous next »
Pages: [1]   Go Down

Author Topic: Clarkson mill chuck MT2  (Read 3094 times)

Offline myfordguy

  • Newbie
  • *
  • Posts: 3
Clarkson mill chuck MT2
« on: January 07, 2012, 04:55:16 PM »
Hi guys,

I would like to purchase a second hand Clarkson autolock mill chuck MT2 with sleeve to  MT3.
Please give some feedback regarding quality  compared to HBM or similar Chinees things.
Is it worth buying?
Does anyone know what thread the backside has that takes the draw bar?

Thank you,

Marc
Logged

Offline udimet

  • Jr. Member
  • **
  • Posts: 27
  • Country: 00
  • Dean Smith and Grace the worlds finest.
Re: Clarkson mill chuck MT2
« Reply #1 on: January 14, 2012, 10:57:31 AM »
Marc,
             Any Clarkson toolholder is far, far better than any offering from HBM or any other Chinese / Indian gear. Clarkson are a recognized production make, and as such are far superior to any home shop gear in every respect. So stick with the Clarkson [as long as it has not been severely abused].
                                                                                                              Regards,
                                                                                                             Udimet.
Logged
Pages: [1]   Go Up
« previous next »