I've been wading through some servos for sale and I don't have enough experience with them to have a good feel for motor strength just going by specs.
Here are specs from a set I'm looking at:
DC38V 2A
30 W AT 1000 MIN -1
MAX STALL TORQUE 0.568 N.m
Can someone give me an idea what these motors would successfully drive?
The application I have in mind is an overhaul of my current stepper system driving the axes on my Craftex mill/drill/lathe. I already have about 1:3 (or 3:1 ?) gear reduction and would probably keep that the same, just replace the motors.
Thanks!
-Sparky