« previous next »
Pages: [1]   Go Down

Author Topic: is there a Grizzly equiv for the Cub630 OR Warco GH750  (Read 5034 times)

Offline pipemakermike

  • Jr. Member
  • **
  • Posts: 17
  • Country: gb
    • Mike Nelsons web page
is there a Grizzly equiv for the Cub630 OR Warco GH750
« on: December 22, 2011, 11:45:45 AM »
I want to fit C5 collets to my Chester Cub630 and the only fittings I can find on the web are from Grizzly but I would need to know which model is close to my Cub.

Regards
Mike
Logged
Regards

Mike

Rob.Wilson

  • Guest
Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
« Reply #1 on: December 22, 2011, 03:01:58 PM »
Hi Mike

What about this one from Warco   http://www.warco.co.uk/lathe-collet-chucks/259-5c-precision-collet-chuck.html   you would have to make/get  a backplate to match you lathe spindle nose  :dremel:


Rob

Backplates   http://rotagriponline.com/index.php?option=com_virtuemart&page=shop.browse&category_id=601&Itemid=29
Logged

Offline pipemakermike

  • Jr. Member
  • **
  • Posts: 17
  • Country: gb
    • Mike Nelsons web page
Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
« Reply #2 on: December 22, 2011, 03:31:29 PM »
Hi Rob

Yes I have that root in hand - I have all the parts - but I would still like a more traditional system
Logged
Regards

Mike

Rob.Wilson

  • Guest
Re: is there a Grizzly equiv for the Cub630 OR Warco GH750
« Reply #3 on: December 22, 2011, 03:36:26 PM »
Hi Mike


By more traditional do you mean draw bar closing ?


Oh ,, Welcome to the forum  :wave:

Rob

PS ,, nice pipes ,,,,,,,,,,, the lad a few doors up gets his out on New Year  :headbang:
Logged
Pages: [1]   Go Up
« previous next »