« previous next »
Pages: [1]   Go Down

Author Topic: Belgium  (Read 3769 times)

Offline myfordguy

  • Newbie
  • *
  • Posts: 3
Belgium
« on: October 06, 2011, 04:14:29 PM »
Hi, I'm Marc from Belgium.
Working as a R&D technician my job is to be creative.
At home there's not much time left at the moment.
Among the projets that I finished is my house, total overhaul of a Honda FT500 and some small stuff

A few years ago I bought an old Myford ML7 in bad condition.
After one year of cleaning and searching for parts I finisched the refurbishment.
Recently I purchased another Myford ML7 for parts, a Rongfu RF20 mill - drill and an Myford ML8.
All need redurbishment with the ultimate goal to make a Baroque Oboe and play it.
I know that it is challenging but I will go for it.


Logged

Offline kvom

  • Hero Member
  • *****
  • Posts: 520
Re: Belgium
« Reply #1 on: October 06, 2011, 06:04:41 PM »
 :worthless:
Logged

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: Belgium
« Reply #2 on: October 06, 2011, 06:15:18 PM »
Hi Marc and welcome to us  :wave:
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Belgium
« Reply #3 on: October 07, 2011, 01:49:58 AM »
Hi Marc.
Welcome to the Collective.  :borg:

Join in. Show pics. Enjoy!  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: Belgium
« Reply #4 on: October 07, 2011, 04:02:42 AM »
Hi Mark :wave:

Hello and a warm welcome to Madmodders

 :beer:
DaveH
« Last Edit: October 07, 2011, 07:51:46 PM by DaveH »
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline spuddevans

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1618
  • Country: 00
  • Portadown, Northern Ireland
    • My Photo website
Re: Belgium
« Reply #5 on: October 07, 2011, 08:23:46 AM »
Hi Marc :wave: welcome to madmodders :mmr:


Tim
Logged
Measure with a micrometer, mark with chalk, cut with an axe  -  MI0TME

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Belgium
« Reply #6 on: October 07, 2011, 09:02:58 AM »
Hi Marc,

A baroque oboe sounds interesting. Do you already play wind instruments, or will you be learning the oboe after you have made one?

I suppose the baroque version with very few keys will be a little easier to make than the modern one which looks like it has about 50.

Andy
Logged
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Rob.Wilson

  • Guest
Re: Belgium
« Reply #7 on: October 07, 2011, 01:47:25 PM »
Hi and Welcome Marc  :wave:

So pleased you decided to take the plunge and join in  :thumbup:

ML8 ,, i have one of those that i am fixing up  :dremel:  .(another ongoing project  :proj: )


Rob 

Logged

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: Belgium
« Reply #8 on: October 08, 2011, 02:21:39 PM »
Marc

Hi and welcome to MadModder. Good luck with refurbishing your ML7 lathe, mill/drill and ML8. When you have this done you should have a good setup in your shop. If you have any questions just ask as there is always someone around to answer or at least  give an opinion.

Cheers  :beer:

Don

Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best
Pages: [1]   Go Up
« previous next »